GBP
Schneider Electric LC1DT25B7
TeSys Deca contactor, 4 poles (4NO), for non-inductive load applications up to 25A/440V AC-1. They can be used to create motor starters for almost any type of application. It provides a 24V 50/60Hz AC coil, 1NO+1NC built-in auxiliary contacts (NC mirror certified), connection by screw clamp terminals. For operating rates until 3600 cycles/hour and environments until 60°C, it procures high reliability and durability. Compact (45mm width), DIN-rail mounting or screw fixing. Power contacts have a 25A resistive load rating. Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh). Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.35 inches tall, 1.77 inches wide and 3.62 inches deep. It weighs 0.80 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.
Both the primary and secondary sections are supplied by an off-line flyback circuit based on VIPER267KDTR high voltage converter for ultra-wide input which provides regulated voltages to the control board, the gate driver ICs and the signal conditioning circuits.
Formal testing and measurement results confirm the ability and performance of ST power products combined with comprehensive digital control to deliver high efficiency, power factor near unity, and low THD across wide input voltage and load conditions.
•System architecture based on transition mode boost PFC, half bridge LCC and synchronous rectification (full bridge)
•270-480 VAC input voltage range
•Output can be configured in constant current (CC) or constant voltage (CV) mode:
o300 W maximum O/P power rating
oCV mode: 48.5 V ± 1%
oCC mode: 6.25 A ± 2.5% with voltage drop from 36 to 48 V
•Peak efficiency >93.5%
•Power Factor > 0.9 for load > 33% of max. load of the input voltage range
•THD < 20% for load > 25% of max. load of the input voltage range
•Dimming control in CC mode configuration:
o0-10 V control
o1% resolution
oanalog dimming
•Soft start
•Protections: I/P and O/P under and overvoltage protection, O/P open/no load circuit protection, O/P short/overload circuit protection
•Digitally controlled by STM32F334R8
•RoHS compliant
•WEEE compliant (2012/19/UE RAEE II)